Earthenware is a hard and low-porosity product produced from natural, clean and healthy soil-based raw materials. Thanks to different raw materials and high firing temperatures, it has high durability and low water absorption. It is easy to clean, does not contain taste and odor, and does not contain germs.
Thanks to the high temperature baking, no fading in colors is possible. It is suitable for use in the microwave. It can be washed in the dishwasher at 50°C with peace of mind.
Our Keramika brand products are suitable for use in the refrigerator, but it is recommended not to use them in the deep freezer. Extreme cold may cause products to break.
Our products are suitable for use in microwave ovens. However, contact with heated ovens and naked flames should be avoided. This causes the products to break.
Lime water may cause lime stains on the products.
Tools that are at risk of scratching, such as metal cutlery, may leave marks on the products.
Your washing container should not be metal and should not contain cutlery, knives, pots, etc. It should not be washed together with metal products such as
It should not be cleaned by rubbing with a wire. Harsh cleaning materials should not be used. Soap-based cleaning materials should be used.
Products must be rinsed thoroughly to avoid stains.
When placing the products in the drying container, contact with each other should be avoided. This may cause damage to the decorations.
If you are washing in the dishwasher;
Our glazed products can be safely washed in the dishwasher. This will not cause any damage to the decorations.
It is recommended that the products not be kept dirty. Dried residues will require more careful and long-term cleaning. This may cause the decoration of the products to be damaged.
The temperature of the dishwasher should not exceed 50°.
Tested and high quality detergents with low alkaline content should be preferred.
Anti-limescale must be used. Failure to use may cause lime stains on the products.
Detergent and auxiliary cleaning agents should not be used above the recommended rate.
The placement of the products in the machine should be such that they will not be affected by water pressure and will not move.